Draytek 2862LAC-K

£389.00

Draytek 2862  VDSL/ADSL Router Firewall

Description

Draytek 2862Lac 3G/4G LTE & VDSL Router

The Vigor 2862L Series features the same specification as the standard Vigor2862 product with the addition of built-in 4G (Cellular/LTE) connectivity, compatible with all UK/Ireland cellular networks (apart from ‘Relish’). The series includes the Vigor 2862Ln and the Vigor 2862Lac, the difference being 802.11n Wireless LAN vs. 802.11ac dual-band (see full specification tab). If you do not want to use wireless it can be disabled.

The embedded 4G/LTE connectivity provides a self-contained solution as opposed to having to add external/USB modems to your router. A standard SIM slot on the back of the router is secured with a cover to prevent accidental removal (you can leave the cover off if you need easy access).

As well as connectivity to the 4G (LTE) networks, the Vigor 2862L series provides backward compatibility to 3G networks for areas or networks where 4G isn’t available. Full function MS message operation also provides additional functionality and control (see later).

Your 3G/4G can provide your sole/primary Internet connection, with optional fallback (backup) to another WAN connection (DSL or Ethernet fed) or 3G/4G can be the backup to your primary DSL/Ethernet connection.

 

Additional information

Technical Specification

Physical Interfaces

LAN Ports (Switch)
5 X Gigabit Ethernet (1000Mb/s) Ports
LAN Port 5 Switchable with WAN2 (req. f/w 3.8.8 or later)
WAN Ports:
WAN1 : ADSL/VDSL, RJ11
WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet for load balance and WAN failover
Switchable with LAN Port 5
WAN3 : USB 2.0 Port for 3G/4G Modem, thermometer or Printer
WAN4 : USB 2.0 Port for 3G/4G Modem or Printer (Not on vigor 2862Ln)
Wireless WAN – Wireless interface can provide WAN connectivity

Performance

Firewall: Up to 400Mb/s max
IPSec VPN: Up to 60Mb/s max

ADSL Compatibility

ANSI T1.413 Issue2
ITU-T G.992.1 G.dmt (ADSL)
ITU-T G.992.2 G.lite
ITU-T G.992.3 ADSL2
ITU-T G.992.5 ADSL2+
Annex L (READSL)
Annex A
Annex M
ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
DSL Forum : TR-048/67 & TR-100

VDSL Compatibility

BT Infinity Option 1 & Option 2 Compatible
BT SIN 498 MCT Approved
Support for G.INP & Vectoring
ITU-T VDSL2 G.993.2
ITU-T G.993.1, G.997.1
Band Plan: G.998, G.997
Annex A, Annex B, Annex C
VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
OLR, UPBO, DPBO Supported
US0 Supported
Loop Diagnostic Mode
DSL Forum WT-114

Load Balance/Failover Features

Outbound Policy-Based Load-Balance to direct traffic via:
NAT or Routing
WAN Interface
LAN Interface
Specific LAN Gateway
VPN Tunnel
IP-Based or Session-Based Load Balance modes NEW!
WAN Connection Fail-over
BoD (Bandwidth on Demand)
WAN1 PPPoE/PPPoA Fallback account, used if the primary details are unable to establish a working connection NEW!
Configurable Load-Balance pool, specify WAN interfaces to load balance
WAN Budget

Vigor 2862 ATM Protocols (DSL)

RFC-2684/RFC-1483 Multiple Protocol over AAL5
RFC-2516 PPP over Ethernet
RFC-2364 PPP over AAL5
PPPoE pass through LAN/WLAN
PPPoE/PPPoA Relay
Transparent bridge for MPoA
Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
Support for RFC4638 for MTU up to 1500

Wireless LAN Features (\'n\' and \'ac\' Models Only)

802.11g/b/n and 802.11ac (Vigor 2862ac only)
Backward Compatibility for 802.11b/g
Wireless Features on Vigor 2862ac:
802.11a
802.11ac (5Ghz)
4×4 MU-Mimo (5Ghz)
Up to 4 Spacial Streams
TX Beam Forming
1733Mb/s Link Rate (5Ghz) + 300Mb/s (2.4Ghz)
Dual-band (2.4/5Ghz) simultaneous wireless
256QAM
Extended DFS frequency range
Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
Packet Aggregation and Channel Bonding
Optional Higher Gain or directional aerials available – Click Here.
Active Client list in Web Interface
Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
64/128-bit WEP Encryption
WPA/WPA2 Encryption
Switchable Hidden SSID
Restricted access list for clients (by MAC address)
Time Scheduling (WLAN radio can be disabled at certain times of day)
Time Scheduling for individual SSIDs NEW!
Access Point Discovery
WDS (Wireless Distribution system) for WLAN Bridging and Repeating
802.1x Radius Authentication
Wireless VLAN
Wireless Rate-Control
Automatic Power Management
802.11e WMM (Wi-Fi Multimedia)
Station Control, limit wireless client access time per day
Airtime Fairness NEW!
Band Steering NEW!
Wireless WAN mode for WAN2, switchable with Ethernet (Wireless models only) NEW!

WAN Protocols (Ethernet)

DHCP Client
Static IP
PPPoE
PPTP
BPA

Firewall & Security Features

CSM (Content Security Management):
URL Keyword Filtering – Whitelist or Blacklist specific sites or keywords in URLs
Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
Prevent accessing of web sites by using their direct IP address (thus URLs only)
Blocking automatic download of Java applets and ActiveX controls
Blocking of web site cookies
Block http downloads of file types :
Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
Time Schedules for enabling/disabling the restrictions
Block popular P2P (Peer-to-Peer) file sharing programs
Block Instant Messaging programs (e.g. IRC, Skype/Yahoo Messenger etc.)
DNS Filter: Use DNS to enforce categorisation
Web Portal
Multi-NAT (32 WAN IPs per WAN1 & WAN2)
DMZ Host
DMZ Port (via LAN port P1, switchable)
40 Port Redirection rules
40 Open Port rules (10 port ranges per rule)
Policy-Based Firewall
MAC Address Filter
SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
DoS / DDoS Protection
IP Address Anti-spoofing
E-Mail Alert and Logging via Syslog
Bind IP to MAC Address
User Management:
Up to 200 Profiles
Supports external authentication via LDAP or RADIUS
Per User Bandwidth and Time Quota
Schedule Control to delete or disable account automatically

Bandwidth Management

Quality of Service (QoS- For devices in the NAT subnet according to source or destination IP)
Guaranteed Bandwidth for VoIP
Class-based Bandwidth Guarantee by User-Defined Traffic Categories
Layer 2&3 (802.1p & TOS/DCSP)
DiffServ Code Point Classifying
4-level Priority for each Direction (Inbound / Outbound)
Bandwidth Borrowed
App QoS: Classify traffic by Application
Temporary (5 minute) Quick Blocking of any LAN Client
Bandwidth Limit (Shared or individual limit)
Smart Bandwidth Limitation (Triggered by Traffic / Session)
Session Limit

Network/Router Management

Web-Based User Interface (HTTP / HTTPS)
CLI ( Command Line Interface ) / Telnet / SSH
Web Console: Access CLI through Web Interface
Administration Access Control
Brute Force Protection
Configuration Backup / Restore
Configuration Import from Vigor 2820, Vigor 2830, Vigor 2850 & Vigor 2860
Built-in Diagnostic Function
Firmware Upgrade via Web Interface, TFTP, FTP
Logging via Syslog
Supports SmartMonitor (up to 50 IPs monitored)
SNMP v2 & v3 Management with MIB-II
TR-069
TR-104
Access Point Management: Centrally Manage up to 20 DrayTek VigorAPs
Switch Management: Centrally Manage up to 10 DrayTek VigorSwitches

VPN Facilities

Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
Tunnelling Protocols:
PPTP
IPSec
L2TP
L2TP over IPSec
DrayTek SSL
GRE NEW!
IPSec Features:
Internet Key Exchange : IKEv1 (Main and Aggressive mode) & IKEv2 NEW!
Security Protocols : AH mode, ESP mode
DiffieHelman (DH) Groups:
IKEv1 : 1,2,5,14
IKEv2 : 1,2,5,14,19,20,21
Encryption:
DES / 3DES (168bits)
AES (128/192/256bits) – Hardware-Accelerated
Authentication – Hardware-Accelerated:
MD5
SHA-1
SHA-256
IKE Authentication : Pre-shared Key or X.509 Digital Signature
DHCP over IPSec
NAT-Traversal (NAT-T)
Dead Peer Detection (DPD)
Port forwarding (Port Redirection, Open Ports) to remote clients connected via an IPsec LAN to LAN VPN
SSL VPN for teleworkers – Up to 16 simultaneous users. Proxy or tunnel
LAN-to-LAN & Teleworker-to-LAN connectivity
MOTP (Mobile One Time Password) for two factor authentication (2FA)
Virtual IP Mapping, map a remote IP subnet/range to another range to resolve IP subnet/range conflicts
VPN Pass-Through

Network Features

Port-Based VLAN (Inclusive/Exclusive Groups)
802.1q VLAN Tagging
Port Mirroring
802.1X Port Authentication
Multi Subnet DHCP Servers with DHCP Relay
LAN Clients : Up to 1022 per subnet (for subnets 1-3)
Custom DHCP Option support
Dynamic DNS
DNSSEC support NEW!
DNS Transparent Proxy
DNS Caching
LAN DNS (supports CNAME)
NTP Client (Synchronise Router Time)
Call Scheduling (Enable/Trigger Internet Access by Time)
RADIUS Client
LDAP Client
TACACS+ Client
High Availability
Internal RADIUS Server
Microsoft™ UPnP Support
Maximum MTU 1534
Routing Protocols:
Static Routing (30 routes)
RIP V2
RIPng for IPv6 NEW!

Operating Requirements

Rack Mountable (Optional Vigor RM1 mounting bracket required)
Wall Mountable
Temperature Operating : 0 °C ~ 45 °C
Storage : -25 °C ~ 70 °C
Humidity 10% ~ 90% (non-condensing)
Power Consumption: 18 Watt Max.
Dimensions: L240.96 * W165.07 * H43.96 ( mm )
Operating Power: DC 12V (via external PSU, supplied)
Warranty : Two (2) Years RTB
Power Requirements : 220-240VAC

Specification

Vigor 2862Ln and 2862Lac ADSL/VDSL LTE Series
Technical Specification (UK Hardware Spec.)

Physical Interfaces
LAN Ports (Switch)
5 X Gigabit Ethernet (1000Mb/s) Ports
(LAN Port 5 is switchable with WAN2 – Ethernet)
WAN Ports:
WAN1 : ADSL/VDSL, RJ11
WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet for load balance and WAN failover
(Switchable as Ethernet LAN Port 5).
WAN3 : USB 2.0 Port for 3G/4G Modem, thermometer or Printer
WAN4 : USB 2.0 Port for 3G/4G Modem or Printer
Wireless WAN – Wireless interface can provide WAN connectivity
Performance
Firewall: Up to 400Mb/s max
IPSec VPN: Up to 50Mb/s max
Cellular Compatibility / Features
Standard-Size SIM Slot
Sending/Receiving of SMS (Text) messages to Web Interface
Status Reports & alerts via SMS, and SMS-initiated reboot
LTE Cat 4 / 3GPP Release 9 with fallback to 3G
LTE Max Speed : 150/50Mb/s (RX/TX)
Standard size SIM Slot on with fixed cover
Unlocked to any network (BT, EE, 3, O2, Vodafone, Eircom)
LTE (FDD) Bands: 1 (2100Mhz), 3 (1800Mhz), 5 (850Mhz), 7 (2600Mhz), 8 (900Mhz) & 20 (800Mhz)
LTE (TDD) Bands: 38 (2570-2620 Mhz), 40 (2300 – 2400Mhz) & 41 (2496 – 2690Mhz)
LTE Bandwidth: 1.4/3/5/10/15/20 Mhz
LTE Power : Class 3 (23dBm +-2dB)
LTE Duplex : FDD (Frequency Division), TDD (Time Division)
UMTS (3G) Bands: 1 (2100MHz), 5 (850Mhz) & 8 (900MHz)
GSM Bands: 900MHz, 1800MHz
3G Data Modes: GPRS/HSDPA/HSPA+
GPRS MS Output : Class 12
Included Antennae : Two with magnetic extension bases
LTE Antenna Connection : SMA Female x 2
ADSL Compatibility
ANSI T1.413 Issue2
ITU-T G.992.1 G.dmt (ADSL)
ITU-T G.992.2 G.lite
ITU-T G.992.3 ADSL2
ITU-T G.992.5 ADSL2+
Annex L (READSL)
Annex A
Annex M
ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
DSL Forum : TR-048/67 & TR-100
VDSL Compatibility
BT Infinity Option 1 & Option 2 Compatible
BT SIN 498 MCT Approved
Support for G.INP & Vectoring
ITU-T VDSL2 G.993.2
ITU-T G.993.1, G.997.1
Band Plan: G.998, G.997
Annex A, Annex B, Annex C
VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
OLR, UPBO, DPBO Supported
US0 Supported
Loop Diagnostic Mode
DSL Forum WT-114
Load Balance/Failover Features
Outbound Policy-Based Load-Balance to direct traffic via:
NAT or Routing
WAN Interface
LAN Interface
Specific LAN Gateway
VPN Tunnel
IP-Based or Session-Based Load Balance modes NEW!
WAN Connection Fail-over
BoD (Bandwidth on Demand)
WAN1 PPPoE/PPPoA Fallback account, used if the primary details are unable to establish a working connection NEW!
Configurable Load-Balance pool, specify WAN interfaces to load balance
WAN Budget
Vigor 2862 ATM Protocols (DSL)
RFC-2684/RFC-1483 Multiple Protocol over AAL5
RFC-2516 PPP over Ethernet
RFC-2364 PPP over AAL5
PPPoE pass through LAN/WLAN
PPPoE/PPPoA Relay
Transparent bridge for MPoA
Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
Support for RFC4638 for MTU up to 1500
Wireless LAN Features (Vigor 2862Ln and Vigor 2862Lac Only)
802.11n 2.4Ghz (2×2)
Dual-Band Wireless Features (Vigor 2862Lac):
802.11ac
4×4 Multi-User-MIMO (5Ghz) – New!
Up to 4 Spacial Streams
TX Beam Forming
1733Mb/s Total Link Rate (5Ghz) + 300Mb/s (2.4Ghz)
Dual-band (2.4/5Ghz) simultaneous wireless
Band Steering – New!
Router-Assisted Client Mobility – New!
Extended DFS frequency range
Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
Packet Aggregation and Channel Bonding
Optional Higher Gain or directional aerials available – Click Here.
Active Client list in Web Interface
Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
WPA2 Encryption
Switchable Hidden SSID
Restricted access list for clients (by MAC address)
Time Scheduling (WLAN radio can be disabled at certain times of day)
Time Scheduling for individual SSIDs NEW!
Access Point Discovery
WDS (Wireless Distribution system) for WLAN Bridging and Repeating
802.1x Radius Authentication
Wireless VLAN
Wireless Rate-Control
Automatic Power Management
802.11e WMM (Wi-Fi Multimedia)
Station Control, limit wireless client access time per day
Airtime Fairness NEW!
Band Steering NEW!
Wireless WAN mode for WAN2, switchable with Ethernet (Wireless models only) NEW!
WAN Protocols (Ethernet)
DHCP Client
Static IP
PPPoE
PPTP
BPA
Firewall & Security Features
CSM (Content Security Management):
URL Keyword Filtering – Whitelist or Blacklist specific sites or keywords in URLs
Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
Prevent accessing of web sites by using their direct IP address (thus URLs only)
Blocking automatic download of Java applets and ActiveX controls
Blocking of web site cookies
Block http downloads of file types :
Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
Time Schedules for enabling/disabling the restrictions
Block popular P2P (Peer-to-Peer) file sharing programs
Block Instant Messaging programs (e.g. IRC, Skype/Yahoo Messenger etc.)
DNS Filter: Use DNS to enforce categorisation
Web Portal
Multi-NAT (32 WAN IPs per WAN1 & WAN2)
DMZ Host
DMZ Port (via LAN port P1, switchable)
40 Port Redirection rules
40 Open Port rules (10 port ranges per rule)
Policy-Based Firewall
MAC Address Filter
SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
DoS / DDoS Protection
IP Address Anti-spoofing
E-Mail Alert and Logging via Syslog
Bind IP to MAC Address
User Management:
Up to 200 Profiles
Supports external authentication via LDAP or RADIUS
Per User Bandwidth and Time Quota
Schedule Control to delete or disable account automatically
Bandwidth Management
Quality of Service (QoS)
Guaranteed Bandwidth for VoIP
Class-based Bandwidth Guarantee by User-Defined Traffic Categories
Layer 2&3 (802.1p & TOS/DCSP)
DiffServ Code Point Classifying
4-level Priority for each Direction (Inbound / Outbound)
Bandwidth Borrowed
App QoS: Classify traffic by Application NEW!
Temporary (5 minute) Quick Blocking of any LAN Client
Bandwidth Limit (Shared or individual limit)
Smart Bandwidth Limitation (Triggered by Traffic / Session)
Session Limit
Network/Router Management
Web-Based User Interface (HTTP / HTTPS)
CLI ( Command Line Interface ) / Telnet / SSH
Web Console: Access CLI through Web Interface
Administration Access Control
Brute Force Protection
Configuration Backup / Restore
Configuration Import from Vigor 2820, Vigor 2830 & Vigor 2850
Built-in Diagnostic Function
Firmware Upgrade via Web Interface, TFTP, FTP
Logging via Syslog
Supports SmartMonitor (up to 50 IPs monitored)
SNMP v3 Management with MIB-II
TR-069
TR-104
Access Point Management: Centrally Manage up to 20 DrayTek VigorAPs
Switch Management: Centrallly Manage up to 10 DrayTek VigorSwitches NEW!
VPN Facilities
Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
Tunnelling Protocols:
PPTP
IPSec
L2TP
L2TP over IPSec
DrayTek SSL
GRE NEW!
IPSec Features:
Internet Key Exchange : IKEv1 (Main and Aggressive mode) & IKEv2 NEW!
Security Protocols : AH mode, ESP mode
DiffieHelman (DH) Groups:
IKEv1 : 1,2,5,14
IKEv2 : 1,2,5,14,19,20,21
Encryption:
DES / 3DES (168bits)
AES (128/192/256bits) – Hardware-Accelerated
Authentication – Hardware-Accelerated:
MD5
SHA-1
SHA-256
IKE Authentication : Pre-shared Key or X.509 Digital Signature
DHCP over IPSec
NAT-Traversal (NAT-T)
Dead Peer Detection (DPD)
Port forwarding (Port Redirection, Open Ports) to remote clients connected via an IPsec LAN to LAN VPN
SSL VPN for teleworkers – Up to 16 simultaneous users. Proxy or tunnel
LAN-to-LAN & Teleworker-to-LAN connectivity
MOTP (Mobile One Time Password) for two factor authentication (2FA)
Virtual IP Mapping, map a remote IP subnet/range to another range to resolve IP subnet/range conflicts
VPN Pass-Through
Network Features
Port-Based VLAN (Inclusive/Exclusive Groups)
802.1q VLAN Tagging
Port Mirroring
802.1X Port Authentication
Multi Subnet DHCP Servers with DHCP Relay
LAN Clients : Up to 1022 per subnet (for subnets 1-3)
Custom DHCP Option support
Dynamic DNS
DNSSEC support NEW!
DNS Transparent Proxy
DNS Caching
LAN DNS (supports CNAME)
NTP Client (Synchronise Router Time)
Call Scheduling (Enable/Trigger Internet Access by Time)
RADIUS Client
LDAP Client
TACACS+ Client
High Availability NEW!
Internal RADIUS Server NEW!
Microsoft™ UPnP Support
Maximum MTU 1534
Routing Protocols:
Static Routing (30 routes)
RIP V2
RIPng for IPv6 NEW!
Operating Requirements
Rack Mountable (Optional Vigor RM1 mounting bracket required)
Wall Mountable
Temperature Operating : 0 °C ~ 45 °C
Storage : -25 °C ~ 70 °C
Humidity 10% ~ 90% (non-condensing)
Power Consumption: 27 Watt Max.
Dimensions: L240.96 * W165.07 * H43.96 ( mm )
Operating Power: DC 12V (via external PSU, supplied)
Warranty : Two (2) Years RTB
Power Requirements : 220-240VAC

Reviews

There are no reviews yet.

Be the first to review “Draytek 2862LAC-K”

Your email address will not be published. Required fields are marked *




Looking for secure 4g connectivity?

Browse our range of Cradlepoint Routers and IoT devices